Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Where can I order the foam for antenna application

Status
Not open for further replies.
A

antenna_abc

Member level 3
Joined
Dec 22, 2005
Messages
58
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,835
Hi, I am wondering where I can buy the foam which has almost the same dielectric constant as the air? What is its name? Thanks.
 

A cheaper alternative to Arlon and Emerson&Cuming products is to buy the very common panels of expanded (or extruded) polistyrene.
They are very common material used for housing.
I tryed the Basf 3035® up to 47 GHz , εr≈1.05 and tanδ so small to be near the noise of meter.
 
Hi antenna_abc,

One is ECCOSTOCK: **broken link removed**
ANother one is ROHACELL: https://www.rohacell.com

Both have dielectrical constant about 1.05 and low losses for RF.

Regards

Z
 
Thanks for all your information. But I am still curious about whether the materials you guys mentioned above is not for prototype design?

Since I am looking for the form in order to support the PIFA and other antenna prototypes' copper foil, so I need the foam that is easy to cut by hand and sticked to PCB. Also, the price should be as low as possible.....

Any more information?? Thanks.
 

Dear antenna_abc,

honeycombe will be suitable for your purpose. It is cheap, easy to cut and will stick very well to PCB for prototype purposes. Just to give an example,
https://www.netcomposites.com/education.asp?sequence=49

Hope this is useful to you.

Cheers,
Element7k
antenna_abc said:
Thanks for all your information. But I am still curious about whether the materials you guys mentioned above is not for prototype design?

Since I am looking for the form in order to support the PIFA and other antenna prototypes' copper foil, so I need the foam that is easy to cut by hand and sticked to PCB. Also, the price should be as low as possible.....

Any more information?? Thanks.
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top