Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

diplexer at S-band with stripline

Status
Not open for further replies.
D

dch316

Member level 2
Joined
Jun 9, 2005
Messages
48
Helped
16
Reputation
32
Reaction score
5
Trophy points
1,288
Location
Spain
Activity points
1,805
hi,
i need suggestions on how to design a diplexer (tx 2.223, rx 2.047 GHz) with stripline technology. I've thought of two interdigital BPfilters but I am not sure if it will work.
thanks in advance
 

if tx looks like a low impedance at rx and vice versa, then this will get you close to the answer.
 

    D

    dch316

    Points: 2
    Helpful Answer Positive Rating
frannk said:
if tx looks like a low impedance at rx and vice versa, then this will get you close to the answer.
Click to expand...
thank you frannk, it sure will help me :D
However, now I am thinking on what type of filter is the best in this case (interdigital?, combline?, coupled resonators?, etc..). Has anybody any suggestion? The only restriction at the moment is that it should be stripline.
thanks
 

It primarily depends on what your bandwidth is and cuttoff, that would determine which filter to use. I woulod think that for your app, a regular stripline should work.

Is this with Rods or microstrip.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top