Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me writing a code for i2c in mc68hc908lk24

Status
Not open for further replies.
R

ragabs

Full Member level 1
Joined
Jun 28, 2005
Messages
96
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
2,111
i2c for mc68hc908lk24

dear all
can u help me to write code for i2c module in mc68hc908lk24?

i already write one but it makes the two pins sda and scl to go low.

if u send me a sample code it will be very useful.

thanx
 

Re: i2c for mc68hc908lk24

I recently made code for I2C module for Freescale uC 9S12DP256, writen in C and using ICC12 compiler. are u interested?

best regards,
 

Re: i2c for mc68hc908lk24

yes ofcourse i think it will be a good guide to debug my code.
can u send it to me? i think it will be very helpeful.

thanx lbdgwgt
 

Re: i2c for mc68hc908lk24

Here it is, hope it helps. I am using the internal I2C module of the uC.
If it helps, don't forget to click the "Helped me" button :D

best regards,
 

    R

    ragabs

    Points: 2
    Helpful Answer Positive Rating
Re: i2c for mc68hc908lk24

thank you
i compare my code with urs and i found that they were almost the same but the difference is the sequence

u first load the adress register then enable the i2c module;
i made the apposite.

now it seems working good needs the traditional debugging steps .

thank u again
i will press helped me :D
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top