Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

factors affecting current mirror

Status
Not open for further replies.
L

lucky8

Member level 1
Joined
Jan 27, 2005
Messages
37
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
293
Hi,

I would like to ask, what are the things that i need to consider for simple current mirror.
I know that the output current of the current mirror is linked to the emitter area of the transitors and the avalanche voltage, VA.
What other factors that i need to look upon for this current mirror?
 

base current, and mismatch, output resistor, perimeter
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
You might find some info you need in an old article I wrote.
**broken link removed**
it is not exactely the same, but closely related.
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
the main factors sre

matching

output volatge

voltege swings

the impedane at the inputs of the transistor may cause errors.
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
output voltage?
do u mean the VCE?

I've read that the output impedance is the measure of the current mirror quality, and how is that?
 

lucky8 said:
output voltage?
do u mean the VCE?

I've read that the output impedance is the measure of the current mirror quality, and how is that?
Click to expand...

An ideal current source is simplay a current source with an infinite shunt resistor.

So, the higher the output impedance of you mirror the less it will be susceptible to load variations. Generally, a current mirror can drive a low impedance node with no problems. Having a high output resistance means you can drive higher impedance nodes with the current source or, alternatively, you have a high quality current source
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
lucky8 said:
Hi,

I would like to ask, what are the things that i need to consider for simple current mirror.
I know that the output current of the current mirror is linked to the emitter area of the transitors and the avalanche voltage, VA.
What other factors that i need to look upon for this current mirror?
Click to expand...

You can try for a better performance using cascoded transistors. It will give you a better matching between the 2 currents (you have a much higher output resistance)
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top