Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Crystal or Crystal Oscillator?

Status
Not open for further replies.
U

ulaska

Member level 3
Joined
Aug 25, 2005
Messages
54
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,286
Activity points
1,790
clk crystal oscillator

i am using hyperStone 16xRS DSP/RISC chip needs 16 MHz.

which crystal can i use? a Crystal oscillator(4 pin) or Quartz Crystal(2 pin) ?

and what is the differences between a CRYSTAL OSCILLATOR and a QUARTZ CRYSTAL? :)
 

A Crystal oscillator(4 pin):
the 4 pin includ: power,ground,clk out.If power is on,the pin clk out will work.

A Quartz Crystal(2 pin):
the 2 pin includ:clk in,clk out.
 
  • Like
Reactions: rvspr

    R

    rvspr

    Points: 2
    Helpful Answer Positive Rating
oscillator generate clock by itself, while crystal need other components (cap and active devices) to construct an oscillator. many MCUs can use both. check your datasheet.
 
  • Like
Reactions: rvspr

    U

    ulaska

    Points: 2
    Helpful Answer Positive Rating
    R

    rvspr

    Points: 2
    Helpful Answer Positive Rating
However for higher fan-out you need to use clock buffers.
 

    U

    ulaska

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top