Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Dual Active Bridge topology gain

Status
Not open for further replies.
abhishek.2138

abhishek.2138

Full Member level 2
Joined
Dec 21, 2013
Messages
133
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,381
The gain equation of dual active bridge is = N *(Vout / Vin), where N = Transformer primary to secondary turn ratio.

Is it correct equation?
Below is the DAB schematic.
1664880468351.png
 

Sort by date Sort by votes
the gain depends on the effective PWM of each side and their phase relationship x the transformer turns ratio

it is possible to operate in a boost mode by building up the current in l and then changing state on the receiving side.

Read up on leading and lagging phase shift for bi-directional operation, also on the phase difference between legs on the LHS ( for example ) which can vary from in phase to 180 deg out of phase ( usually full power )

lots to learn here ...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top