Anton89
Member level 3
Good morning everyone,
maybe the question does not concern about this forum section, but I don't know who to ask.
Until now, I work in an aerospace company. I have totally designed a RF filter with lumped elements by following the typical design flow: I've designed the ideal filter by using the S-parameters of lumped elements; the filter, then, has been implemented on PCB, and finally I tuned the design by using the CST to analyze the PCB, especially the parasitic inductance due to lines. I used a co-simulation paradigm to perform the tuning.
At collage I have also designed a k-band low-noise amplifier in ADS for an exam. Even if it was made for an exam, the project has required very very effort (it was also forseen the design of layout) and, if you had wanted, you could have asked professor to send the design to foundry in order to realize a prototype.
I know well that I have no many years of experience about RF designing, but... Would all these experiences qualify me as RF designer? Could I write this status in my CV or it is soon?
Thank you
maybe the question does not concern about this forum section, but I don't know who to ask.
Until now, I work in an aerospace company. I have totally designed a RF filter with lumped elements by following the typical design flow: I've designed the ideal filter by using the S-parameters of lumped elements; the filter, then, has been implemented on PCB, and finally I tuned the design by using the CST to analyze the PCB, especially the parasitic inductance due to lines. I used a co-simulation paradigm to perform the tuning.
At collage I have also designed a k-band low-noise amplifier in ADS for an exam. Even if it was made for an exam, the project has required very very effort (it was also forseen the design of layout) and, if you had wanted, you could have asked professor to send the design to foundry in order to realize a prototype.
I know well that I have no many years of experience about RF designing, but... Would all these experiences qualify me as RF designer? Could I write this status in my CV or it is soon?
Thank you