Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Difficulty in interpreting STM32F407VE datasheet

Status
Not open for further replies.
The available pins are listed in the datasheet and must be configured by setting alternate function for the respective GPIO pins. What's your problem?
 

Problem is in PIC and AVR way of thinking.
When you work with STM, you should understand, that individual characteristing are explained in reference manual for corresponding microcontroller, but perepherial are combined in RM0090 - common document for STM32F4xx family.
 
  • Like
Reactions: varunme

    varunme

    varunme

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top