Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need variable DC voltage

Status
Not open for further replies.
P

pasicr

Advanced Member level 1
Joined
Aug 13, 2005
Messages
440
Helped
39
Reputation
80
Reaction score
29
Trophy points
1,308
Location
Macedonia
Activity points
4,213
Hi for all,
I need variable DC voltage from +2VDC to -2VDC,
change continuously with 0,1 VDC step,
for example,
on two connectors,
one on negative potential the other start with +2VDC, after 30 seconds that point need to be +1,9VDC, after 30 seconds need to be +1,8VDC.........
and when come to 0VDC, then continue with negative -0,1VDC, after 30 seconds -0,2VDC....until reach -2VDC

can somebody advice what will be the best method to reach that?
thanks
regards
 

You have not mentioned whether it is a voltage reference or power supply?

In other words, what are the current requirements, a few uA, a few mA or a few Amps?

Do you have any experience with microcontrollers, if so and you are seeking a voltage reference, a few uA or mA, then a Bipolar DAC might be an option.


BigDog
 
  • Like
Reactions: pasicr

    P

    pasicr

    Points: 2
    Helpful Answer Positive Rating
Hi,

If you don't have negative supply voltage you may generate it with a charge pump.

I'd use a tiny microcontroller with a pwm output.
Use a spdt analog switch to change between +Vcc and -Vcc.
Control the switch (duty cycle) with the pwm output.
An RCRC filter generates DC voltage ...

Klaus
 
  • Like
Reactions: pasicr

    P

    pasicr

    Points: 2
    Helpful Answer Positive Rating
Another option, there are a few dual supply digital pots available which could then be followed by a opamp in a voltage follower (unity gain buffer) configuration to prevent loading.


BigDog
 
  • Like
Reactions: pasicr

    P

    pasicr

    Points: 2
    Helpful Answer Positive Rating
Thanks for replay,
Need to be power supply with few mA,
exactly I need power for electrodes in galvanization process,
 

Hi KlausST,
thanks for your reply,
can you please send more info about spdt analog switch use?
I have MAX394 spdt analog switch,
thanks in advance
regards
 

Hi,

What's not clear?
NC to -Vcc, NO to +Vcc.

Klaus
 
  • Like
Reactions: pasicr

    P

    pasicr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top