Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to cut the copper clad plate?

Status
Not open for further replies.
X

xmli1976

Full Member level 1
Joined
Nov 3, 2004
Messages
95
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Activity points
830
cutting copper clad

I've used a angle grinder, but it's too rough.
 

how to cut coper lad

dremel
 

    X

    xmli1976

    Points: 2
    Helpful Answer Positive Rating
how to cut copper

Hi

If you are using a dremel or similar please do ot forget to use dustmask. The glassfiber particles can be irritating.

I use a "bench metal scissor"

Cl
 

    X

    xmli1976

    Points: 2
    Helpful Answer Positive Rating
how to cut copper clad boards

If you want to cut a clad piece of material a bench shear is good but leaves a rough edge - tin snips work well for thin material, for odd shaped pieces a dremel tool, router or nibbling tool may be used.

SiGiNT
 

    X

    xmli1976

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top