Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Questa] How to find multiple drivers using QuestaSim?

Status
Not open for further replies.
ivlsi

ivlsi

Advanced Member level 3
Joined
Feb 17, 2012
Messages
883
Helped
17
Reputation
32
Reaction score
16
Trophy points
1,298
Activity points
6,868
Hi All,

How to find multiple drivers using QuestaSim?

Thank you!
 

well used the "-check_synthesis" with vlog/vcom, and that's add checks like this.
 
  • Like
Reactions: ivlsi

    ivlsi

    ivlsi

    Points: 2
    Helpful Answer Positive Rating
Thanks!

Probably you know why I cannot add signals from Source Window to Waves... What's the best way to do so? When I right Click on a signal in the Source Window, all the options under the 'Add' submenu (including an option Add->ToWave) are in grey color... Why? Drag & drop also dosn't work... So, how to enable adding the signals from Source window to Waves?

Thank you!
 

Could you please provide the full command for combination of vlog/vcom and "-check_synthesis" switch and others? Thank you!
 

vlog -help :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top