Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

usb wifi receiver replacement

Status
Not open for further replies.
You can buy same frequency as your wifi receiver was operating. 2.4GHz was the frequency so try to find the receiver with same spec and sync it. But not sure whether it can able to match as the original one. But need to quite careful while selecting new one need to match all the specs as per your lost receiver.
 
  • Like
Reactions: Dont

    D

    Dont

    Points: 2
    Helpful Answer Positive Rating
If the suggest idea in the post 2 doesn't worked out means purchase a pair of Wifi transmitter and receiver with the same make and specifications. Replace with the old ones this will solve your problem.
 
Thanks for the answers!

I tried the a wifi receiver at the same frequency, but it does not detect the presenter. I guess there is some unique code. I'll try to find a pair of wifi transmitter and receiver.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top