Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Explain about Current mirror advantages and disadvantages

Status
Not open for further replies.
V

vinodhsaminathan

Junior Member level 2
Joined
Sep 25, 2013
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
1
Activity points
136
Hi,

I know what is current mirror and what are the advantages but can somebody tell me the disadvantages of current mirror in a ckt if is there.
Thx
 

Hi

It depends on the circuit obviously, but I can think of two possible problems:

1) The mirror adds noise. This is worst if there are no emmitter resistors. With big enough emmitter resistors, the noise can be reduced to an insignificant level.

2) The mirror may add distortion.This is worst if the Vbe of the transistors are very different and emmiter resisters are used. There's two ways to minimize this:
A) Use closely matched transistors for the mirror.
B) Make sure the resistance of the emmitter resistors is much greater than the dynamic emitter impedance of the transistors.
 
hi thx for the post. can u tell me how it add noise and distortion to ckt. am working with CMOS technology.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top