Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Other related connections:
S/P pin is GND on the AD9852 for serial SPI mode.
Be sure to tie the unused parallel pins low per Table 10 of the AD9852 data sheet.
The XMEGA has 3 SPIs ports, they are available on Port C, D, and E. Chose the port that is easiest to connect to.
The SS (Slave Select) pin on the XMEGA is not used because the XMEGA is the master because the AD9852 is hardwired as a slave.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
