Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Current comsumed by a typical SIM card?

Status
Not open for further replies.
A

Amalinda

Banned
Joined
Sep 25, 2012
Messages
104
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Activity points
0
I want to know if a SIM Card can be powered through a Microcontroller, thus can somone tell me the current consumed by by the Power Pin (VCC) of the SIM Card? I know that there are different classes to SIM cards.. but I just want a typical figure.. not exact.

I dont want to use a transister if I can source the current through a Microcontroler. thank you for your responses and time.
 

If i supply 3.6 volts to a 1.8V sim, would it cause any damage to it?

p.s : i just tried suplying 3.8V from a LiPo battery to a SIM card that takes in 1.8V. Afterwards I tested it. It works perfectly. I just want to know the current used by the SIM Card now. An approximate value will be more than enough.
 
Last edited:

Obvious enough, the excess supply will burn the chip and render it useless
 

I tried giving the SIM Card 3.6 Volts. Nothing happened. Im wondering if you have an idea of the current required by the SIM Cards VCC.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top