Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Aperture coupled p@tch antenna design

Status
Not open for further replies.
svarun

svarun

Full Member level 5
Joined
Mar 31, 2002
Messages
271
Helped
22
Reputation
44
Reaction score
15
Trophy points
1,298
Location
In the warm company of God's most exquisite creati
Activity points
2,746
Hi all,
Has anyone designed ( approximately ) an aperture coupled p@tch antenna ? I basically want to know how do you obtain a first estimate of the slot dimensions and the stub length for maximising the bandwidth. Any references to papers or book chapters in this regard will be most welcome. Thanks for the time.

-svarun
 

the stub length should be less than λeff/4.

try these papers:
http://www.ecs.umass.edu/ece/pozar/aperture.pdf

"Guidelines for design of electromagnetically coupled microstrip patch antennas on two-layer substrates"
By: Georg Splitt and Marata Davidovitz
IEEE transactions on antennas and propagation, VOL 38, No. 7, July 1990

Regards,
Hassan
 

    svarun

    svarun

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top