Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
To change the pins in your schematic, click on U113 so it is highlighted then right-click it and select "Edit Part". Double-Click each of the VSS pins (not the labels) and it will bring up the Pin Properties window. Change the name to GND, Shape to "Zero Length", type to "Power", and un-check Pin Visible. Once you are done, close the window. Ignore any warnings about a pin with the same name. Then either update the current part or Update all if you are using the same part in multiple spots in your design.
If this works they way you want it to, you may want to consider changing the library part so you will not need to modify the individual parts the next time you use it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
