Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Relation between resistance and frequency

Status
Not open for further replies.
siddarth.ghaste said:
HI,
What is the relation between resistance and frequency???
Click to expand...

totally there is no linear relation between resistance and frequency in the low frequency but maybe the resistors show Inductance features in the high frequency
 
If you are talking about Ideal components, there is no effect of a resistor on frequency.
If you are making some RC / RL / RLC filter type circuit, then the value of R affects the response of the circuit at different frequencies. But this effect is not due to the Resistor alone, but mainly due to the Capacitor and/or Inductor present along with the resistor.

If you are looking at real components, a resistor will have some stray inductance due to how it is made.
 
I think you are asking what happens to a resistor at high frequencies.

A real resistor can be lumped as Reff = R +ωL. That is a Resistor and an Inductor in series.
R is the nominal value of the resistor.
L is the stray inductance.
The value of L will be very small in the order of nH (10-9H)

Therefore at low frequencies, the The effective impedance would be Reff ≈ R
But at very high frequencies say ω = R/2πL and higher, the Inductance value will dominate and the Reff would be much higher.
And it will increase with frequency.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top