Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sensor output (voltage, current)

Status
Not open for further replies.
V

vamsee

Full Member level 1
Joined
Nov 6, 2012
Messages
95
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,885
hi all,

i want to know what is the difference between voltage as output and current as output?

i am using hall sensor, and in the datasheet it mentioned 5V as input(supply) and 4mA as output..

i am bit eager to know that, voltage and current both presence together..
 

Input:
The sensor needs 5V as a supply voltage and it will draw an arbitrary amount of current from the 5V supply as it needs it.

Output:
The sensor provides a 4mA to 20mA output which is proportional to change at the input. You just terminate this output into a load / resistor of your choice and then you've got a voltage over the resistor. They give out 4-20mA because in factories the wires to the respective sensors are sometimes extremely long and transmitting the signal as a current source makes it way more immune to noise.
 
  • Like
Reactions: vamsee

    V

    vamsee

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top