Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need of code for 10 digit text editing using 89c51

Status
Not open for further replies.
P

prakashvenugopal

Advanced Member level 1
Joined
Jun 1, 2011
Messages
473
Helped
15
Reputation
30
Reaction score
15
Trophy points
1,298
Activity points
4,973
Hi all,

I am working in atmel 89c51. I need to edit parameter and store the data in EEPROM. Right now, i had edited the
10 digit editing using LCD. The 10 digit which i edited is numbers (i.e)( 0 to 9). Now i have to edit the text parameters also I.e. (0 to 9 ) and after 9, it should be (A to Z). How to do this text editing?. did anyone having this text editing code.
Please help.

Note:
I am having 4 keys in my board.
Menu key --> to move from one menu to another menu
up key --> to increment the number digits 0 to 9 and A to Z
down key --> to decrement the number digits Z to A and 9 to 0
enter key --> to save the settings.

Thanks in advance,
V. Prakash
 

Is this what you need?


Code C - [expand]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

....
....
switch (keypress)
{ 
  case  0:  //up 
  {
      if (last_value==0x39)//if last value is '9' then set as 'A'
      {
          last_value=0x41;
      }
      else
      if (last_value==0x5A)//if last value is 'Z' then set as '0' (zero)
      {
          last_value=0x30;
      }
      else last_value++;   //else, do normal increment
      break;
  };
  case  1:  //down
  {
      if (last_value==0x41)//if last value is 'A' then set as '9'
      {
          last_value=0x39;
      }
      else
      if (last_value==0x30)  //if last value is '0' (zero) then set as 'Z'
      {
          last_value=0x5A;
      }
      else last_value--; //else, do normal decrement
      break;
  };
.... 
....
.... 
};
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top