Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

newbie question: Altium 10 modifying available schematic part

Status
Not open for further replies.
BasePointer

BasePointer

Full Member level 2
Joined
Jul 3, 2002
Messages
130
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Location
TURKEY
Activity points
955
Hi,

In Altium, Miscellaneous Devices.IntLib has one part named Trans3. I want to do little modification on the part drawing like changing dot places on transformer.
But I don't want to draw whole part from beginning. Is there a way to modify symbol as I wish and save as a different part into my SchLib file?
I created a new part in my schlib and try to copy past, didn't help.

Thank you.
 

What exactly didn't work? You either copy whole Component (go to the library window which list components, right click, Copy, go to the your library, right click on the window which list components in your library, right click and Paste) or you copy just Schematic symbol itself (go to the library window where you see the symbol, select symbol and CTRL+C, then go to your library, create new component and press CTRL+V insert the symbol)
 

robertferanec said:
What exactly didn't work? You either copy whole Component (go to the library window which list components, right click, Copy, go to the your library, right click on the window which list components in your library, right click and Paste) or you copy just Schematic symbol itself (go to the library window where you see the symbol, select symbol and CTRL+C, then go to your library, create new component and press CTRL+V insert the symbol)
Click to expand...

I have just placed the symbol that I needed to my schematic, and copied from there and then tried to paste it to library editor after adding a new part there. What is the proper way?
 

when you are opening intlib, you have an option to extract SchLib and PCBlib - use this. It will create Schlib and Pcblib from the intlib
 
robertferanec said:
when you are opening intlib, you have an option to extract SchLib and PCBlib - use this. It will create Schlib and Pcblib from the intlib
Click to expand...

yes after opening the intlib file then copying from library editor to editor did the job.
Thank you.
 

    V

    Points: 2
    Helpful Answer Positive Rating
When you had it place on your scehmatic you could have used Design --> Make Schematic Librar. To create a library from all the parts currently on the Schematic.

Better Late than never.
Chris.
 
PCBcomponentlibraries said:
When you had it place on your scehmatic you could have used Design --> Make Schematic Librar. To create a library from all the parts currently on the Schematic.

Better Late than never.
Chris.
Click to expand...

This is nice command also. Thanks for the trick:p
 

I gone through this Posts & thread. It is really helpful to edit Schematic & footprint library which is supplied from Altium.
Open Schematic>Design>Make Schematic Library.
Thank you PCBcomponentlibraries.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top