Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

interfacing GLCD method

Status
Not open for further replies.
A

amor88_star

Newbie level 4
Joined
Apr 21, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,371
I need Help how to interface GLCD (LM3229 or LM240128TCC) which available in the market
I want the generic solution not any micro controller solution.

the way to configure pins ,how to write text and shift and how to draw (using equation ???), I don't want to use any library as I want to do it myself
or any open source code

also I want to know if i have to use driver like gLCD Driver KS0107 ?????

thanks in advance
 

Graphical_LCD.PNG

Have a Look on this Pin_Out...
And Read the Controller Datasheet

Follow this video..
GLCD PIC Oscilloscope (ISIS 7) : By Arun J - YouTube

Hope u will get some help from this
 
thanks for your reply
but what i want to know is the congratulation to use GLCD on the pins and how to draw and how to write text

like if i want to draw triangle on Glcd
VSS Power 0V Power Supply, GND
3 VDD Power Positive Power Supply
4 V0 Power LCD Contrast Reference Input
5 /WR Input Data or Command Write Signal
6 /RD Input Data or Status Read Signal
7 /CE Input Chip Enable Signal

and all other pins
 

JUst Have a Look at Datasheet of your Graphical LCD Controller... it will help you...

Capture.PNG

Just Have a look on this Part of datasheet.. it will help you..
I am not able to upload the Whole datasheet due to some Network related difficulties...

Hope This Helps You..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top