Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi all,
I wrote a program to generate sine wave with f=10Hz on port D with 256 samples and high frequency(f=1MHz) automatic pulse on PB.3.
Please let me know am I right???
I'm not sure!!!
I compiled that with AVR studio and it worked good.
Regards
Ronak
my code:
/*
simple sine...
Contact Control
Hi all,
I designed an ultrasonic system with piezoelectric on 1MHz frequency with AVR microcontroller.
I want to design a system that able to find contact of piezoelectric with surface!!!
In other words,I want to apply contact control or coupling control on this system.
On...
Hi,
My isolation amplifier is AD202,but i couldn't find suitable APP.notes from Analog Device Company.
BW=5KHz
I have problem with ISOLATION CONCEPTS exactlly???:cry:
Hi Cobol,
I know this,I have problem with with SUPPLY ISOLATION exactlly!!!
I know that we have different GNDs (Analog And Digital!!!),But i don't know about
"How can I isolate GNDs????"
Thanks for your reply,Please help me Cobol.
Thanks in Advance.
Vahab
adc isolation
Hi all,
I have problem with ISOLATION AMPLIFIER on biomedical systems,
In other word,
I want to know how i can Isolate ADC from Processor and where is the isolation block location???
I recorded biosignal with INSTRUMENTATION amplifier and feed to antialiasing filter and H.P.F...
Hi all,
I have problem with ISOLATION AMPLIFIER on biomedical systems,
In other word,
I want to know how i can Isolate ADC from Processor and where is the isolation block location???
I recorded biosignal with INSTRUMENTATION amplifier and feed to antialiasing filter and H.P.F., then I want to...
Re: Slope limiter Filter
Hi,
I want to measure the amplifier output noise on the EMG and biosignals applications.
I work on the ROBOT CONTROL WITH BIOSIGNALS.
My B.W. is MAX 20KHz.
Min=5Hz.
Please let me know your opinion.
Thanks and Regards.
Vahab
slope limiter+emg
Hi FvM,
Thanks a lot.
I would like you will be success.
could you tell me about noise meter,Please?
It's Important.
Thanks in Advance.
Vahab
slope limiter
Hi ,
I want know how can I desgin special type of "Low Pass Filter" named
"SLOPE LIMITER FILTER".
Next ,
I have problem with noise meter !!!
Do you have any App.Note or handbook???
Please send me.
Please help me.
I am waiting to your Replies.
Thanks in Advance.
Vahab
Noise meter
Hi ,
I'm working on the EMG amplifier and I want to measure noise on my complete circuit(Preamplifier,filter,amplifier,...).
I found my Oscilloscope and voltmeter shy to measure my noise ,thier sensitivity are very LOW!!!
I want to find good circuit for NIOSE METER and bulid it...
RMS Detector
Hi all,
I want to find suitable circuit for measurement RMS value and convert it to DC.
please help me.
It is important for me and i'm waiting to you.
Good Luck
vahab
Branch Coupler Line
Hi All,
How can i find the suitable references about "Branch Coupler Line"?!!
Please let me to know how can i design them on the HFSS or MWO?
Can anybody help me!!!!
Thanks in Advance.
Vahab
P.S.i I want to simulate it on the HFSS or MWO
Hi all,
I designed the low pass microstrip filter and want to simulate it on the HFSS.
I want to know how can i run the simulation.
Please help me.
regards.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.