Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by sintis

  1. S

    How to build a power wideband directional coupler?

    wideband directional coupler 100w I want to design and build a high power, up to 100W wideband 20MHz - 500MHz directional coupler with 30dB - 40dB coupling Any suggestions? Thanks in advance
  2. S

    Wideband microwave VCO design , YIG excluded

    Message is unavailable.
  3. S

    Error when saving the patterns in PCAD2001

    Re: PCAD2001 LIBRARY PROBLEM Your selection prior to saving must contain only elements, allowed for placement by "Part Editor" - see “Placement Toolbar”.
  4. S

    how to convert pcad 2002 to 2000?

    PDIF export - import
  5. S

    Mesuare current without a shunt resistor

    Isolated current sensors from ZETEX: ZMC05, ZMC10...
  6. S

    how to use PCAD pcb file as library file

    1. Save PCB in ASCII format. 2. Open Library Executive, Library, Translate. 3. Select Source Format = P-CAD ASCII, select your PCB as Source Lib, type name of new Destination library and translate
  7. S

    Files made with P-CAD Master designer 8.7

    pcad 8.7 Just open old files in P-CAD 2002. No libraries need. All parts, symbols etc. are stored in database.
  8. S

    Article from V*H*F Co*mmunicatio*ns

    Scaned article:
  9. S

    Where to find low ohm coaxial for RF pwr transformer

    I'm looking for low ohmic semirigid coaxials (10, 15, 25ohm) for RF power transformers. Order should be low quantity - 2m of each one. If anybody know some better sources let me know. Thank You
  10. S

    Importing old Pcad files in new version

    You can bundle p-cad45 *.prt files in lib file, convert *.lib to *.pdif and use Library Executive | Library | Translate
  11. S

    a low phase noise , low cost vco design

    Frequency about 950MHz, tuning range 30MHz.
  12. S

    Wideband and Low-Noise Microwave VCO

    BFP183 (Ft=8GHz) operates reliably in the frequency range 2-3.2GHz using a beter transistor like BFP420 (Ft-25GHz) allows to shift up frequency up to 4GHz
  13. S

    Broadband VCOs using Microstrip Techniques

    vco microstrip Broadband VCOs using Microstrip Techniques
  14. S

    Wideband and Low-Noise Microwave VCO

    Wideband and Low-Noise Microwave VCO article
  15. S

    ~1 GHz low phase noise oscillator

    Some Examples
See more

Part and Inventory Search

Back
Top