Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
mimo capacity matlab
Hi to all!I need to plot capacity-VS-SNR for some MIMO configuration for my thesis.
The formula I'm tryin to use is
\[C=\log_2 \left[ det \left( I_M + \frac{SNR}{N} HH^{\dag} \right) \right] \]
Where M, N are the numbers of RX and TX antenna.
H is the channel matrix and...
Re: Spatial Diversity
thanks for your answer.
Sorry I forget to explain about d meaning: d is the phisical distance between the two antennas and I think that the right definition should be the second one.
Confirm?
thanks
Hi to all!
I'm simulating a 2 antenna MIMO configuration printed on FR4 substrate.
To test spatial diversity separation should I use:
1) \[d=\frac{\lambda_0}{k}\] (where \[\lambda_0\] is vacuum wavelength)
2) \[d=\frac{\lambda_g}{k}\] (where \[\lambda_g\] is guided wavelength)
thanks
bye
Hi to all!
I'm simulating a 2 antenna MIMO configuration printed on FR4 substrate.
To test spatial diversity separation should I use:
1) \[d=\frac{\lambda_0}{k}\] (where \[\lambda_0\] is vacuum wavelength)
2) \[d=\frac{\lambda_g}{k}\] (where \[\lambda_g\] is guided wavelength)
thanks
bye
patch antenna hfss
Hi! I think the problem is in the coax feed design. When you create a coax you should follow this procedure:
1)create cilinder with diameter of coax and assign material teflon
2)create vacum cilinder with internal conductor diameter: this cilinder must be coaxial with the...
I need this paper for my project, please
Base station polarization diversity reception for mobile radio
Kozono, S. Tsuruhara, T. Sakamoto, M.
thanks in advance
BR
Hi to all!
I'm trying to simulate a loop antenna for my project but I have many problem with the CPW feed. The CPW length has too big influences on the resonance frequency of my antenna, I think it could be a BALUN problem: but loop antenna should not be a balanced structure?
Please I hope that...
Need "Internal Compact Dual-Band Printed Loop Antenna for Mobile Phone Application"
I need this paper for my project please:
Internal Compact Dual-Band Printed Loop Antenna for Mobile Phone Application
Chi, Y.-W. Kin-Lu Wong
Dept. of Electr. Eng., Nat. Sun Yat-Sen Univ., Kaohsiung;
thanks...
I need it for Wlan (2.4 Ghz and 5.5 Ghz), I was thinking to a loop antennas, I find some articles saying that that type of antenna does not excitate a big current on ground plane. Do you know anything more about?
ground plane antenna
hi to all!
I need to design a dual band antenna with reduced size ground plane for my thesis: does anyone have any suggest or article?
thanks
bye
hi to all!
I'm tryin to design a cpw feed inverted F antenna and I've design the hfsss model. I've made some simulations and I see that cpw line length influences a lot the resonance frequency. Maybe my CPW lumped port design is not correct.
Can anyone check it please?
thanks
hi to all!I need to design a microstrip antenna for umts application and use it to study a possible mimo configuration (diversity in polarization and space). Can anyone suggest me a good design, that does not need big ground plane to work?Thanks so much!!
bye
Francesco
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.