Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi,
I have a bank of battery with output voltage of 48V. Now there is an electronic circuit which requires 12V, 1A to work. I want the simplest circuit diagram that can be used to reduce the 48V to 12V.
Thanks.
This a part of my entire code.
The timer 1 is intended to generate a 1sec delay,
during the 1 sec delay,
timer 0 will be counting the frequency of the pulse connected to it.
When TF1 is raised (after 1 sec),
The number of pulse (frequency) is displayed on an LCD.
Please don't bother on the...
I want to use either Timer0 or Timer1 of the AT89S52 microcontroller to measure external pulse. While reading, I came across an example that tries to set up timer0.
The example is using a frequency of 24MHz.
Below is a part of the code.
TMOD=0x52; // timer 0 mode 2, counter 1 mode 1...
If the version of the program you are using is the demo version, I don't think you can edit the parameters but if it is the professional version, you can easily edit the parameters by typing.
Connect the output of the device through a step down transformer to the inverting input of the SG3524 and connect the non inverting pin to a reference voltage.
This ensures that the output is constant at all times, if you are confused please read the datasheet of SG3524.
All I know is that trademark is associated with patent while registration of a company has to be done through the Co-operate Affairs Commission. This is for Nigeria and I think it should be applicable to many countries.
First, disconnect the battery and measure the voltage of the battery. Connect the battery back, power the inverter and measure the voltage of the battery.
If you connect the cable that is used to charge the battery, is the buzzer still sounding?
Give me a feedback.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.