Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hello
Dear All, my question is how*to plot the Log Scaled Value of S-parameters in HFSS. I want to get*the value of S11, S12, S21 and S22 in log scale.
I know how to plot normal S-parameters in units of dB, dBm , (real and imaginary parts) etc. But I need the log_scaled_Value. If anyone know...
Hi
Thanks Jstuemke.
I have again tried as you said to me but it is still same as first happened. I am following the same procedure but I dont know why it is not properly wrapped around a sphere. I have attached the image as a result of using Wrap sheet command in HFSS.
This warning is shown...
Dear All, Thanks for your suggestions. I have got the solution. As i use the tools option in the results window and using Touchstone option. I just write the data in text file format and the reopen it in Excel for further processing.
Thanks once again for helping me!!
Yes if there are any...
Hi
I have simulated an LC series circuit in ADS 2009 and analysed the s-parameters. Now I want to export the S-parameters as a text file or CTI file or CSV file or matrix to plot a graph in any other tool like MS Excel and Origin Pro etc.
But I do not know how to export the data files from...
Thanks jstuemke,
Actually I want to wrap a sheet around a sphere. As earlier I have warped a sheet around a cylinder in HFSS but now I also want to wrap the sheet around a sphere. For this I am using the same method as I used to wrap a sheet with zero thickness around a cylinder.
The surface...
Hello ,
I am looking for a way to simulate a patch antenna in HFSS, wrap around a sphere. But I am not able to find the way to do it.
I have a patch antenna and wrap it around a cylinder surface successfully but when i try to wrap around a sphere I could not do so. I always have error?? in...
Hi to all,
I want to to calculate the performance parameters like ECC, Total Active Reflection Coefficient (TARC), and Channel capacity Loss (CCL) of a 2x2 mimo antenna array using the S-Parameters.
However, I know the formula of ECC , But i dont know the relationship to Calculate TACR and...
Hi to All
I Have designed an antenna using HFSS 15. Now i want to fabricate it for realization of the simulated results.
The problem I am facing is how to make Garbar file for fabrication? HFSS export only DXF File but when I open DXF file in DXF viewer the dimensions are not matching to the...
Hi to all;
My question is that, Can we calculate the RCS of an FSS design in HFSS by using the Floquet port?
I have been told by some one that you should use incident plan wave to excite the unit cell of FSS and for that also change the solution setup in HFSS.
Is there any way to calculate the...
thanks catherine_smith
I have used Floquet ports to analyse the FSS, so in case of floquet ports along with master and slave boundaries we cannot calculate the RCS right?
Actually floquet port also excites the structure by incident wave(plane wave). Is there any possibility to calculate RCS...
Hi all;
I have designed an FSS for band stop applications successfully using HFSS version 15. Now i want to calculate RCS of the same FSS. Is it possible to calculate?
If it is possible then please tell me how we can calculate it in HFSS.
Is there any formula for RCS calculation using...
Hi,
Anyone knows about how to check the angle variations in case of Frequency Selective Surface using the wave-port in HFSS.
Actually i want to verify the results of FSS unit cell using Floquet port and wave-port in HFSS.
Please guide me how the task could be done.
With Best Regards:
Muhammad...
Hi to all;
I want to design conformal FSS. so in this regard i need to know which tool is best for conformal design either HFSS or CST:?: Actually i am use to with HFSS, if Conformal FSS could be designed in HFSS then Please share some tatorials with me. If Cst is best for conformal FSS then...
Hi to All,
I need list of journals that have some impact factor, are open access (No Submission Fee etc.).
Plz give me if you know any one.
With Best Reguards:
M Idrees
Hi, thanks for reply;
Sir actually i have successfully done the design and analysis of FSS in HFSS.
Now i want to how to design and analyze the same FSS unit cell in Comsol Multiphysics or CST.
But i don't have CST MWS software that's why i have taken a step towords COMSOL multiphysics.
Can you...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.