Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to check Angle Variations in case of FSS using Wave- port in HFSS

Status
Not open for further replies.
M

muhammad idrees

Member level 2
Member level 2
Joined
Nov 5, 2010
Messages
45
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,693
Hi,

Anyone knows about how to check the angle variations in case of Frequency Selective Surface using the wave-port in HFSS.

Actually i want to verify the results of FSS unit cell using Floquet port and wave-port in HFSS.
Please guide me how the task could be done.

With Best Regards:
Muhammad Idrees
 

Hi muhammad idrees,

HFSS comes with a great built-in example for using Floquet ports. I would check that out first.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top