Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I have used for many years at work the Eagleware 6.5B, with very good yeld up to 10 GHz.
Now I am retired but I still like to play with RF design.
In the last period I have found the Eagle Genesys 8.11B that is the old 6.5B that operates also on Windows 7 and 10.
Unfortunatelly my installing...
I found a geiger tube ( cilinder 130 mm x 20 mm diameter) about.
With the following label:
Type: X.A.1
s/n: 88151
op. volts: 1450
Window weight 7. mgm/cm^2
Made in England by DISTRON
Anybody can give me more details?
DISTRON website is not dealing with components, only instrumentation.
BradtheRat,
thanks for your suggestions. I checked if the rotor is forcing, there are no problems and when working there is no intelligible noise, I have to put ears very close to the body of the motor in order to hear the noise of rotation . Also the water is at correct level and pressure as...
Thanks for suggestions, a breaker switch my be suitable since it will introduce minimum paerts. The winding solution is still interesting, I had it in mind, but I did not guess the possible amount of pick up voltage...
All the troubles started when I discovered that , when the controller gives...
Thanks FvM,
the motor is really a circulator pump for hot water, it has a 2.5uF capacitor and the data are 230V AC, 2300 t/min, 112W and 0.49A. From electrical point of view the main and the capacitor pins are useful...
I do not have an idea what could be the current drain when the motor is not...
I have to solve the following problem with a proper electronic solution.
I have an AC monophase motor that I cannot reach and I must detect whether it is rotating when the 220V ac main is connected. It is not possible to reach rotating parts because it is completely mechanically screaned. It not...
I am looking for an old Vectron catalog in order to know the meaning of ME-8.
Unfortunatelly on knew catalog the marks are quite different.
Many thanks for your help.
Meshgate.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.