Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Dear all
1st i've to say that i intended to make this issue in new topic as it seems confusing to me.
The situation is as follows:I have Sony Ericsson T290 which supports at commands with an internal modem,and i tested it on hyperterminal and worked fine on it.
the problem was connecting it to...
Dear all
i asked a friend of mine he told me that i should send something before sending AT commands to the"Sony Ericsson T290" specially for the ericsson type but he told me that he doesn't remember what is it.
as i told you before i tried everything and the Mobile doesn't response to At...
Mr Seadophine,but i don't know what to do now,i almost tried everything i tryied the serial cable and max232 and used the cut cable without the max232(i mean connecting the mobile pins directly to microcontroller) i reached the point i gave up hope using Atmel at89s52,then i tried to go on with...
Hello All,I finished the Midterm exams.and now back to the project
I still have the problem i mentioned above even i used AVR Chip"ATmega" with the same problem no response from the Mobile,i tried another mobile from a friend "Siemens c35" it worked.
I don't know the problem and we have to...
Do you mean from some outer source of media and moving it to computer through microcontroller?
please explain your question so maybe others can help you
Regards
8085
who said 128kb? actually al i know that it's somehow or another 64 kb so no way ,at least for my knowledge.
If someone have new information of this show us with evidence
Regards
bascom-8051
i guess all data files ".dat" are appended on the program its self even the demo version.
i know that when want to call "89s8252.dat" i.e. as a microcontroller on your program .
call it it will work give it a try.
This is done through the "$regfile" as follows
$regfile =...
hex file generated by keil
Mr hn1 i hope this can help you.
i attached the programs i work with with a text file named "How to use programmer by Hatem.txt"describing how to use it.
Now i have to pause my project as we are having exams by now.so i'll resume it after exams and tell you what is habbening,and thank you alot for your help and i hope it really works.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.