Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Klaus, nothing personal. I did not feel offended.
I was only trying to clarify that the focus of the post was not about what ADC to adopt, but about how to interface it in order to get a data stream. In any case the data must be handled in 32-bit chunks, both with 24 and 32 bits.
The main...
Klaus, thank you for your reply. I never mentioned 32 bit in fact, I know very well that they are useless. However, between 16 and 24 bits, I have enough experience in analog design to take advantage from the difference, and I have already designed systems with 24 bits that go beyond the limits...
Hello, I need to interface a high end 8 channels ADC to a microprocessor or microcontroller.
The candidates are ADS1278, CS5368, AD7768, AK5558VN.
I know how to handle all the part related to the analog, power etc. I would like to interface with something that can handle the data, stream them...
Hello, I developed a board with an FPGA and a 1GB PHY. The 1GB autonegotiation is OK, and the board is only transmitting data in streaming, there is no need to receive in this application.
The stack is not a standard TCP one, but it is a reduced customized stack that only sends packets blindly...
Hello
I have designed half bridge many times, but never a full bridge.
I understand how to handle dead times with half bridge, and I know I can use 2 half bridge driving them with the same PWM signal, negated on the second half bridge, to obtain a full bridge.
But, in order to build a highly...
Hello, I have downloaded LTM4644 reference design from Analog
https://www.analog.com/media/en/reference-design-documentation/design-integration-files/DC1900A.zip
I have a license of Altium Designer, and Allegro viewer.
While I can open the .DSN file and view it from Allegro viewer (so it seems...
Sorry for replying after such a long time, but I have been traveling and I had some issue so that I could not connect.
I do not necessarily need tchebycheff filter, I can use also other types, however, I was just hoping to see an implementation of a 10 poles (or more). I could not find any...
Unfortunately I need at least 90dB/octave, perhaps a bit more. 80 is not enough. How do I implement 9 or 10th order? I have never seen an implementation
I need to have a stopband around 2kHz (to be defined exactly), and a falloff of ~90dB/octave.
Ripple is acceptable, this is not a problem.
Yes I thought about elliptical filter, but I could not find any implementation with such a steep falloff.
Hello
I need to build an analog high pass filter with a very steep response. Chebyshev 8 poles filter is not enough.
I cannot use digital filters in this application.
Unfortunately all the tables available do not go beyond 8 poles.
Switched capacitors filters are a bit noisy, but I do not...
As it is a pulsed system, and the output is closed on a resistor, by recording the voltage on the scope I can obtain the current, so the output power is easy to obtain, until I am driving a resistive load.
For the input, since the pulse is very short, the power supply is not fast enough in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
