Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
low frequency electromagnetic modeling
There is an other Program which is also from Ansoft : RMxprt™.
RMxprt, our motor-design software, allows users to enter motor specifications, such as operating source, rotor, stator, lamination geometry, winding configuration, and materials, and...
maxwell 2d rotor models
HFSS = High Frequency signal simulation (Ghz) . HFSS is for small structures only, and don't contain mechanical movement. If you want to simulate electric field in a coil you can do it with HFSS, but without movement....
Re: V*O@I$P line interface
There is a software coming called SkypeIn which provides those services
**broken link removed**
In the future more companies in Voip software will have phone to PC capabilities:
http://www.google.com/search?hl=nl&q=%22Phone+to+PC+capabilities%22&meta=
verilog ams fabricate
http://www.accellera.org/Accellera
- development and use of standards required by systems, semiconductor and design tools companies
http://www.advancedmsinc.com/AMS - Circuit
Creator for schematics and PCB Design, SpiceCREATOR for circuit simulation
as well as...
The highest error areas are defined, as the areas were the electromagnetic field varied the most. Thus HFSS didn’t use other solutions to calculated the local errors.
hfss lumped wave port internal face
Important information about waveports in HFSS!
Characteristics
-Wave ports solve actual field distributions for one or more propagating or non-propagating Modes
+For “nodal” port excitation references, optional Terminals may also be defined, permitting a...
For all the newbies without points, and people who are intrested in more presentations:
**broken link removed**
**broken link removed**
**broken link removed**
hffs to simulation magnetic
Thnx mirriyaz for all help :) ,
A low magnetic bias is unfortunately no option, because the simulation is needed to predict ferromagnetic resonance and so high fields are needed.
I found a solution to the problem my self, when solve inside is enabled for magnetic...
magnetic saturation hfss
Disabling magnetic properties is making the magnetic saturation and delta H of for example iron zero, than the ferrite material is simulated as a normal non-magnetic material. It is almost the same as in HFFS Options, disabling the option "Include ferrite materials"
magnetic material simulation hfss
My structure is a coplanar wave-guide, which contains a ferromagnetic layer(Fe).
The wave-guide can only be simulated successfully when the magnetic material parameters are disabled (zero). When I enable the magnetic material parameters, the process will die...
coplanar waveguide hfss
In Ansoft HFSS simulation software I build a Coplanar waveguide. In a Coplanar waveguide you put a signal on the central conductor, and you ground the other two conductors. But how can I ground those conductors in HFSS ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.