Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi all
I performed to enter on Power-down by set PCON.1=1 before setting level-Activated External Interrupts ITx and enable EXx.
clearWatchDog(); // Clear WatchDog
IT0 = 0; // Level_Activated Interrupt
EX0 = 1; // Enable External Interrupt
IT1 = 0; // Level_Activated...
pic18f4550.h
In Addition:
Menu\Project\Set Language Tools Location
and Menu\Project\Set Language Tools Suite
for path to mcc18.exe, mplink.exe and mplib.exe
If it don't work, I'll send you new C18 Compiler (Ofcourse It worked well)
mailto pmnam2002@yahoo.com
interrupt c18
There are two vector interrupt in C18 Compiler.
- One is at 000018:
#pragma code low_vetor=0x18
void interrupt_at_low_vector(void)
{
_asm GOTO low_isr _endasm
}
#pragma code // Return to default code section
- and the other:
#pragma code high_vetor=0x8
void...
avr with flash disk
Sorry I don't understand what you can?
In this interfacing, USB disk is 'client' (or 'slaver')
If you wan't to read or write into USB disk, You'll have to simulate USB HOST.
It's really complex.
:cry:I was afraid of simulation USB HOST, one of which create 1ms Header Frame...
Voice Identification
In my mobile phone, there is voice command function.
And I want to talk to my robot in practice.
Please help me about voice command function both software and hardware.
I think that may be Discrete signal Processing....
Thanks
voice comand
In my mobile phone, there is voice command function.
And I want to talk to my robot in practice.
Please help me about voice command function both software and hardware
Thanks:?:
I just constructed two circuit with MAX232 and TRXQ1. My purpose is wireless communication between of Computer1(node A) and Computer2(Node B).
I built it the same at sample of datasheet on page 9 with MAX222 is replaced MAX232 and tied mode pin (number 12) of TRXQ1 to ground for broadcast mode...
I just constructed two circuit with MAX232 and TRXQ1. My purpose is wireless communication between of Computer1(node A) and Computer2(Node B).
I built it the same at sample of datasheet on page 9 with MAX222 is replaced MAX232 and tied mode pin (number 12) of TRXQ1 to ground for broadcast mode...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
