Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by BuBEE

  1. BuBEE

    altium sheet document parameters

    Re: altium sheet document paraneters on the other hand, you can add your own parameter name and put "=YourOwn" in template file (schdot)
  2. BuBEE

    modelsim simulation in xilinx

    Is it license problem ?
  3. BuBEE

    waveform generator in FPGA

    for a simple square wave, it like a clock. You need just a counter in your vhdl code. But for sine wave i think you need A/D Hardware.
  4. BuBEE

    Which VHDL/Verilog Editor is the best ?

    I think, Modelsim is good but too slow on my machine.
  5. BuBEE

    How to configure Spartan using 8051

    XAPP058 it works ! You have to download source code from xilinx website and modified (just a little).
  6. BuBEE

    Anybody can share Xilinx Training documents?

    This is a good topic. Added after 28 minutes: visit www.petalogix.com for uclinux on S3E board
  7. BuBEE

    Need recommendations of books on modelsim simulator

    modelsim yeah , i think Modelsim user manual that enought for beginner and advance user.
  8. BuBEE

    please help. : install tftp-server on CentOS 5.2

    centos tftp server Ok , Friend I change my OS to CentOS 5.3 and everything work already
  9. BuBEE

    Need a link to xilinx embedded training material

    xilinx embedded https://www.petalogix.com
  10. BuBEE

    please help. : install tftp-server on CentOS 5.2

    centos tftp Hello I just start to learning FPGA and uclinux. I have some problem about TFTP installation. i installed with $ yum install xinetd tftp-server tftp Then , I created directory with $ sudo mkdir /tftpboot $ sudo chmod -R 777 /tftpboot $...
  11. BuBEE

    Why does the Modelsim fail to simulate the execution of a C program from DDR SDRAM?

    edk ddr sdram if you used EDK, I don't know why you need to simulate with DDR-SDRAM.
  12. BuBEE

    how can i describe a multiplier using a ROM in VHDL?

    Did you means use lookup-table ?
  13. BuBEE

    virtex2p implementation.....

    https://www.xilinx.com/univ/xupv2p.html

Part and Inventory Search

Back
Top