Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Actually but everywhere in the tutorials, videos, etc only lambda units are used, so this micron creates confusion.
More over when I changed my technology to 1.2um tech so lambda is 0.6u
and created an inverter,
and after ext2spice i got this,
* SPICE3 file created from inverter.ext -...
Actually In my EDA work group there are two labs one is 'design lab' another is 'implementation lab'. my design flow is covered using 4 different EDA tools linked together, and only hspice l.2016 is linked to these softs so i am only to use hspice l.2016 only, also I don't have the login access...
Not subscribe to receive patches and updates?
I could not locate a message board for HSpice, is there any way or forum, email etc to ask this problem directly to the synopsys hspice team? I could not register to the synopsys community because Non-customer community registrations have been...
Till now I have tried 10 examples, the last is the above voltage divider, it has no transistor or any other device model involved. All examples are showing the same behaviour, they are running well with hspice j2014 but not with hspice l.2016.
It is very strange and embarrassing situation.
Great thanks for your reply, now I am trying the simplest, voltage divider
*** TOP LEVEL CELL: R_divider{sch}
R0 vout vin 10k
R1 0 vout 10k
* Spice Code nodes in cell cell 'R_divider{sch}'
v1 vin 0 sin(0 5 1k)
.OPTIONS LIST NODE POST
.tran 1u 5m
.print tran v(vout) v(vin)
.END
output of hspice...
Very grat thanks for reply, actually what I was telling that in previous versions of magic vlsi tool the layout window show units in 'lambda', you can see the image in magic website (http://opencircuitdesign.com/magic/) i.e., http://opencircuitdesign.com/magic/giffiles/magic_7_4_screen.gif...
Hi I am new to the Magic VLSI tool, the problem is that I opened magic by the command : magic but the units are displayed in microns, not in lambda. I googled a lot how to change it to lambda, but no luck.
In previous version of magic and in all tutorials it is showing lambda.
Please somebody...
Hi I am learning Alliance CAD System for my Research project, and I am new to it. To give a simple start I am starting with a simple INVERTER design. Everything is going fine but when I use the command "ring" for core to pads routing I am getting error,
"o reading netlists, layout views of core...
Yes sir I have ensured that the LIB file is OK, actually yesterday night I simulated with HSPICE L-2016 in my first lab, actually both labs has HSPICE L-2016 but still no luck the same wrong output. Then I simulated on three different computers with same netlist and model files but HSPICE J-2014...
Hi
I am new to HSpice and simulating a simple CMOS inverter, the netlist is as follows,
Inverter Circuit
M1 OUT IN VDD VDD CMOSP L=0.18u W=1.8u
M2 OUT IN 0 0 CMOSN L=0.18U W=0.9U
VDD VDD 0 1.8
VIN IN 0 0 PULSE 0 1.8 2n .5n .5n 7n 20n
CLOAD OUT 0 20fF
.OPTIONS LIST NODE POST
.TRAN 200p 20n...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.