Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Crystals are like 30 year old technology. Today, the clock frequency for the motherboard comes from an oscillator.
Anyway, if you are looking to change the settings, you need to get into your BIOS. Doing that is not exactly straightforward as every manufacturer does it differently...
Well, I have a different chipset in my lappy but I solved my heating issue by putting two ballpoint pens underneath it. Sometimes simple and cheap can do the job.
Do you have partitions set up? If not, you will need to use the fdisk utility to do that. If you can't get there, you might try getting UBCD from here: Ultimate Boot CD - Overview
I did that same job a while back. Yah, they don't make it easy.
My experience is that the tolerances is so tight that there is hardly room to get a tool in there in the first place. So tool selection is likely the make or break deal here. Assuming that you are dealing with the same thing...
Yah, any UPS will do the job more or less. What you want to do is think about how much run time you want and select the batteries with that in mind. Check the electrical specs on the TV that you have in mind and calculate what your needs are going to be. Also, keep in mind that different sets...
Re: HP Server 24xCDROM
Hey Tom,
As far as the hardware goes, there really ought to be little problem doing that. The one issue that you could get stuck on would be the physical connections that the motherboard supports. There are a few standards and you will need to get a drive that matches...
Well, I did a bit of googling for “replacement ac adapters printer”. I figure that the voltage spec will probably at least point you in the right direction. The best that I can come up with are web stores that sell the things but only for HP. Why that is I don't know, probably just bad...
Re: I need some help selecting a transformer for old hardwar
Hey thanks for the replies and questions. That alone tells me that I might have a chance at this. Let me do this in an order that makes sense to me.
Pics: My current camera is 15 MP and I don't have the software installed to make...
I need some help selecting a transformer for really old hardware.
So my project is an early 70's synthesizer/keyboard that I am trying to rehab.
I had it sort of working before but at one point, I realized that the transformer was damaged and needs to be replaced. While looking at it, the...
What code do you want to reuse?
If it is FOSS, then check the documentation. The binaries are probably fair game. Even if the originator wants you to recompile or if you want to recompile, you should just have to make sure that you follow the license details.
If it is MS .net stuff, well...
Hello,
I checked the Dell web site and it appears that they do support XP for the studio 1555. That is somewhat important as newer hardware sometimes does not have drivers for older operating systems.
That being said, how inverted are you in what you have already done with your lappy? I ask...
Hello there.
Allow me to recommend my personal favorite program. CDEX.
It is about the simplest interface that you are likely to come by. Once you have set the options that you like, ripping can be done with only a couple of mouse clicks. Also, you can save the files to nearly any format...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.