Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi there,
I need to get up to 1500 meters (in open field) comunication link, between ADEUNIS modules. My terminals are a master which is an 869.525 MHz ASK transmitter and a slaves (ASK receiver).
The complete set of modules I used is the ARF27 from ADEUNIS and it's datasheet can be found at...
Hi there,
I would like to build a circuit for changing the mains voltage value to a lower 0-5 Vdc or pulse in order to connect it to micro and have info about the mains voltage value. The product will be class 2 which means that it must be isolated with maximum leckage current 0.5mA.
I have...
Hi there,
I would like to control trucks ground speed and engine rpm using a microcontroller. There are a lot of sensors on a truck like hall effect sensors, reluctanse sensors e.t.c. that give information in the MCU.
So I would like to make circuit for control the truck's velocity (ground...
build a 125 khz oscillator
Ok,
This is clear.
You could do this thing using read only tags (EM4100) or read/write tags (AT5567). In order to comunicate with the tags you could use an ic like
EM4095, 4,2 - 5,5V.
or HTRC110 (SPI controlled), 4,5 - 5,5V.
First of all you have to decide of...
Hi there,
Using the LM324 (2*LM358 in the same package), in a new product design I would like to drop the current consumption whenever I choose because the power supply is a battery. So having 2,5 - 3,5 V to the 4 inputs I would like to shut down the power supply of the ic, in order to stop the...
Yes,
these are the words that a friend told just some days ago. He also told me that C++.NET is one of the worst tools for doing fast and easy your job.
But, In my very small research I found that C++ is the only .NET tool for stand alone applycations without the using of the framework behind...
Hi there,
I have 3 years of C embedded programming and more enough in VB6. I got a C++Reference book (Herbert Schildt "The Complete Reference 4th Edition") in order to start with Visual C++.NET, but it seems
IIIIMMMMPPPPOOOOSSSSSSSSIIIIBBBBLLLLEEEE
for me to understand.
I...
Hi there,
I am trying to find the datasheet of the scd soic-8 named U2520SA.
The label says:
ZMD 0424
U2520SA
7016
Does anybody have this datasheet or knows the link to download it???
Thanks for your time.
Michael
photocell and micro
Hi there,
How would you connect a comercial 24V npn photocell to a microcontroller input (Vcc = 5V). Also, would you debounce the signal in order to avoid the very fast noise pulses and also to have a fast enough system.
Does anybody have the experience on photocells...
There are a lot of ways and components to do this.
Firstly there must be a very good pcb design using good enough ground planes and the apropriate type of trucks for the power supply, ground and signal tracks.
Also you could use low H coils or ferit beads, between the output of the voltage...
6ps5102
Hi there,
I try to find the datasheet of this mysterious chip but I can't. Does anybody knows somethind what is it, is there any datasheet thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.