Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in
Clip-in-Line, high-shock, high vibration SLC is designed for cost savings by utilizing a tin plated shell and limiting gold to only needed contact are
Clip-in-Line, high-shock, high vibration SLC is designed for cost savings by utilizing a tin plated shell and limiting gold to only needed contact are
Solder Cup SLC - with sufficient mass and contact area, as well as a thick diameter spring, 20+ amp SLCs are possible.
SMT SLC - This large face SLC actually doubles up as a PAD connector for another mating SLC.
Horizontal SMT - Typically installed in thermoplastic insulator and mounted horizontally to PCB, the large shoulder allows for excellent solder attach
Embedded Body SLC - Note the body below the SLC shoulder is typically soldered into a PCB. This allows for SLCs with long strokes.
Coax SLC - This is a patented style SLC specifically designed for robust operation in high-shock and vibration environments. This SLC has an integra
SOLDER TAIL SLC - typical tail length is at least .100" making it ideal for .062"-.093" thick PCBs.
mhoulroyd

Clip-in-Line, high-shock, high vibration SLC is designed for cost savings by utilizing a tin plated shell and limiting gold to only needed contact are

There are no comments to display.

Media information

Album
Various Types of Spring Loaded Contacts
Added by
mhoulroyd
Date added
View count
1,015
Comment count
0
Rating
0.00 star(s) 0 ratings

Part and Inventory Search

Back
Top