Continue to Site

Welcome to

Welcome to our site! is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Microchip 8051/80C51 Microcontrollers

After reading the following announcement I thought it might be of interest to forum members utilizing the 8051 and variants in their designs.

Microchip Technology Inc., a leading provider of microcontroller, analog and Flash-IP solutions, announced on Feb. 21, 2012 that it will continue to manufacture legacy 8051/80C51 MCUs that provide pin-for-pin-compatible replacements for most of those recently placed under “End-of-Life” (EOL) notification by NXP. Included are drop-in replacements for NXP’s P89LV51RB2/C2/D2 and P89V51RB2/C2/D2 EOL series of 80C51 8-bit microcontrollers.

While the various Microchip PIC series of microcontrollers are well known and utilized by many of the forum members, the Microchip series of 8051 are not. The Microchip series of SST89V/ SST89E 8051/80C51 Microcontrollers may provide an alternative source for those forum members requiring 8051s for their designs.

NXP’s P89LV versions are 3V MCUs, and are 100% compatible with Microchip’s SST89V MCUs. Likewise, NXP’s P89V versions are 5V MCUs, and are pin-for-pin compatible with Microchip’s SST89E Microcontrollers and with prices in the $2 to $3 range for single quantities, they are an economical choice as well.

Additional Information is available at the following:

Microchip 8051/80C51 Legacy Microcontrollers



There are no comments to display.

Part and Inventory Search

Blog entry information

Read time
1 min read
Last update

More entries in Uncategorized

More entries from bigdogguru

Share this entry