Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

zero cross detector that produce 0V to 5V output

Status
Not open for further replies.

newton brawn

Newbie level 6
Joined
Sep 9, 2009
Messages
14
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,392
voltage detector

Hi everyone !

Im looking for a zero voltage detector, a circuit that make a pulse every time that the line voltage (230V, 60Hz) cross the zero voltage.

It will be used to fire a thiristor or a IGBT.

Any suggestion ??

Regards
 

zero volt detector

u have ready made packages that do what you want..........

else you do with opto coupler and PIC say,
 

Re: Zero voltage detector

Do you mind to send the circuit diagram, and give more eetails ?
Thanks
Newton

Added after 1 minutes:

cameo_2007 said:

sorry, please explain
Thanks
Newton
 

Re: Zero voltage detector

You can use comparator with zero referance on non inv pin & feed your rectified AC on the inv pin(With proper attenuation) to get ZC pulses on the output.
 

Zero voltage detector

To be a zero reference comparator the input will have to have pmos devices, correct?

What is ZC pulses?
 

Re: Zero voltage detector

Hi

See microchip site for X10 application note - you will find there A zero crossing detector as a part of X10 application

All the best

Bobi

The microcontroller specialist
 

Re: Zero voltage detector

I love this circuit:
**broken link removed**

//a
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top