frdm90
Member level 1
I know there are a lot of same problems on the internet, but there are different solutions, every time when i do this what i read on xilinx forum or other site does not work
I am trying to program a XC9536XL with DLC9G platform cable and i have an error in iMPACT:
PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1': Device IDCODE : 01011001011000000010000010010011
INFO:iMPACT:1579 - '1': Expected IDCODE: 00001001011000000010000010010011
'1': Check to make sure if version '0101' is supported.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
Maybe somebody has similar problem? I have add pullup resistor to TDO, check all voltages....
I am trying to program a XC9536XL with DLC9G platform cable and i have an error in iMPACT:
PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1': Device IDCODE : 01011001011000000010000010010011
INFO:iMPACT:1579 - '1': Expected IDCODE: 00001001011000000010000010010011
'1': Check to make sure if version '0101' is supported.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
Maybe somebody has similar problem? I have add pullup resistor to TDO, check all voltages....