Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Wind and electricity considerations for microwave design

Status
Not open for further replies.

eyci

Newbie level 4
Newbie level 4
Joined
Aug 21, 2005
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Philippines
Activity points
1,342
COULD ANYONE GIVE ME INFORMATION ON MICROWAVE DESIGN FOR PSTN? WE USED FREQUENCY DIVERSITY FOR THIS, IS IT COMPATIBLE FOR HAVING A FULL DUPLEX MODE?

HOW ABOUT WIND CONSIDERATIONS AND ELECTRICITY?

THANK YOU!
 

long haul microwave design

Pls explain more about your work.
 

Re: microwave design

PSTN (Public Switch Telephone Network), how it is related to Microwave Link?

Please explain?
 

Re: microwave design

actually, the microwave design will be useful fo a PSTN public switch telephone network, the microwave is just the medium to be used most especially for long-haul trunks between telephone offices, my major concern is the microwave design if it is reliable to use frequency diversity for that since a PSTN is a full duplex transmission mode...

and we made the microwave design in a windy place, will it affect my signal? i used a 8.3875GHz midband frequency for a 41.05km distance for the said microwave design...
my concern really here, is it ok for me to use a frequency diversity and does the wind affects my line of sight signal?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top