Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why pure conductor has infinite relative permitivity

Status
Not open for further replies.

ehsanelahimirza

Full Member level 6
Joined
Feb 24, 2006
Messages
334
Helped
28
Reputation
56
Reaction score
7
Trophy points
1,298
Activity points
3,570
Hi all

Why pure conductor has infinite relative permitivity.
i am even confusing permitivity and relative permitivity.

Thanks in advance for help
 

If it's infinite it doesn't much matter whether you are talking about absolute or relative permittivity, does it.

Think about what permittivity (or dielectric constant) physically means. It describes the degree to which an applied electrostatic field induces a counter polarization field within a material (usually a dielectric but dielectrics are simply on a continuum with semiconductors and metals).

Then think about what allows a metal to be a conductor, namely that metals have carrier concentration so high and with such high mobility that they equalize charge disparities at a significant fraction of the speed of light (such that voltage is nominally the same on two end of a metal wire, for example).

Combine these two and you should see the answer.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top