Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
the coverage area of GSM1800 is lower than GSM900 because in GSM1800 we use the band around 1800MHz while in GSM900 we use the band around 900MHz, and there is a relation between the received power at the MS and the frequency used for transmission that is as the frequency increases the received power decreases due to the path loss increase(link budget equation),so at the same transmitted power and at the same sensitivity the coverage area is less for 1800 than 900
I wish this satisfies you
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
