Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why For 2G/3G on mobile phone or tablet the “Dial Number” is not required ?

Status
Not open for further replies.

aneesholv

Advanced Member level 4
Full Member level 1
Joined
May 23, 2011
Messages
119
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
India ,kerala
Activity points
2,118
Why we not required Access number / Dial number in mobile phone GPRS setting ?
For 2G/3G on mobile phone or tablet the “Dial Number” is not required. but in 2g/3g dongle or datacard there is a access number / dial number is required in their settings. Why this difference ? Can you explain


Regards
Aneesh
 

Packet oriented connection (GPRS, EDGE, UMTS, HSDPA) doesn't use dial numbers. It uses a service access point (APN) and optionally username and password. Mobile network service providers usually set a default APN, so it must not necessarily be specified.

Some modem drivers use a dummy dial number like *99# or so to select packet communication. But it has no network related meaning.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top