Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

which mcu can be ported with WinCE ?

Status
Not open for further replies.

muoinhohn

Full Member level 2
Full Member level 2
Joined
Nov 5, 2004
Messages
135
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Location
Hanoi
Activity points
1,007
Hi all
I'd like to use WinCE. So that i do not known exactly resources (memory, interrupt,...) that one processor need have to be ported WinCE.
If anyone known it, pls suggest to me.
Regards
Muoinhohn
 

ARM9 (and above - ie ARM10, ARM CortexA8, ete) processors run WinCE.
So you have a lot of mcus to choose from!

Added after 17 minutes:

In fact all ARM9 chips run Symbian OS, Palm OS, Linux and Windows CE!

Check the following development boards:

1. LH7A404 - Sharp/NXP ARM9
https://nicolasbesson.blogspot.com/2008/04/nxp-lh7a404-arm-9-based-processor-runs.html

2. Xscale - Intel/Marvell ARMv5T
**broken link removed**

3. Atmel ARM9 AT91SAM9260 processor
https://www.emacinc.com/som/som9260.htm

4. More
**broken link removed**


I hope this helps:))
 

Thanks Tamasco. So I'd like to see which characteristic that one cpu had have to be ported WinCE, for example how many Kbytes, cpu need have MMU or no, etc...
 

**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
 

derek122 said:
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
HI derek122
What are the above links ? I don't understand.
Regards
Muoinhohn
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top