Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What ratio for inductances in "LLC resonant converter"?

Status
Not open for further replies.

eem2am

Banned
Advanced Member level 4
Joined
Jun 22, 2008
Messages
1,179
Helped
37
Reputation
74
Reaction score
24
Trophy points
1,318
Activity points
0
Hello,

I have to do LED Driver from 370VDC Bus.

It is two series strings of LEDs, 100V and 0.5Amps for each string.

I wish to do LLC resonant converter to give me 180V from the 370VDC.

I will then switch the 180V with two buck LED drivers to give the 100V and 0.5A for each LED string.

I have read the two articles on LLC
https://www.fairchildsemi.com/onlineseminars/LLCresonantConverter.pdf
https://www.fairchildsemi.com/an/AN/AN-4151.pdf

....i am wondering what to make the ratio of Lr to Lm?
(Lr = resoant inductor
(Lm = magnetising inductor of transformer

Also, at what point does a "series LC resonant converter" become an "LLC resonant converter"......there seems to be essentially no difference between them
 

"Also, at what point does a "series LC resonant converter" become an "LLC resonant converter"......there seems to be essentially no difference between them" . With the series LC circuit the transformer is part of the resonant circuit. With LLC, the leakage inductance and the C are the resonant components, the transformer is then fed by them, (even though the first L {leakage inductance} is actually part of the transformers construction)?
Frank
 
  • Like
Reactions: eem2am

    eem2am

    Points: 2
    Helpful Answer Positive Rating
thanks but are you sure?

i thought with LLC, the leakage , cap AND magnetising inductance are all part of the resonating circuit?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top