Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What does metal stack option 8m5x2y2z mean ?

Status
Not open for further replies.

Mina Louis

Newbie level 4
Newbie level 4
Joined
Jun 14, 2011
Messages
7
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,319
what does something like 8m5x2y2z mean? I already know that 8m means 8 metal layers, what about the x y z ?
 

This means that 8 metal layers with thickness x. 2 metal layers with thickness y and 2 metal layers with thickness z. Total of 12 metal layers. Usually y and z are some integer multiple of x
 
Hi yadav and Mina

First of all the mentioned stack is wrong.. I will explain you later... but beofre that the noraml nomenculature is

8m5x2y2z-

8m ->>> total 8 metal


5x ->>> 5 metal of x thickness. Mx
2y ->>> 2 metal of y thickness. My
2z ->>> 2 metal of z thickness. Mz
apart of this there will be Metal 1 also . M1 (that's by default included in the metal stack)

So total metals will be 1+5+2+2=10.

So the correct metal stact is 10m5x2y2z.. or may be some thing like 8m5x2y or 8m5x2z.

For more detail, you can cehck the design manual of corresponding Foundry. Above one is with respect to TSMC foundry nomenculature.

I hope it will help you. Let me know in case of any confusion.
 
Thanks so much birdy and yadav
and yes you're right, it's 10m5x2y2z, I wrote it wrong
 
5x means not just width but metals M2,M3,M4,M5,M6 have the design rules of Mx (spacing, area, etc.) which is specified under the Mx section in the DRM. Similarly 2y will have M7 and M8 rules as My. This is based on TSMC rules. This nomenclature may be different for different foundries.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top