Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

VLSI Layout tools, Electric and Cadence

Status
Not open for further replies.

beowulf

Member level 4
Member level 4
Joined
Jan 19, 2005
Messages
69
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Activity points
581
has anybody used both Cadence and Electric (the free layut tool).
I wanted to know if there was any similarity in terms of functionality between both. I do not have access to cadence, if I practice on Electric (basic inverter cct and such) will that be good experience.
Any pointers will be great

Thanks,
Beowulf
 

Electric VLSI is good tool and you can carry forward with that but OrCAD is something you will have to switch on finally sometime!

PS:You might be wondering why I answered this after 7 years is because there will be students with same doubt this will be helpful to them
 

    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top