virtual serial port communication

[visva]

I need to send data from micro controller(89c52) to my system. So i have simulated circuit(contain MAX232,RS232,89c52) in proteus for serial communication by using UART method. i am going write java program for display the value which is coming through serial port(RS232). i need to check it virtually. any one help me how to do this process in proteus .

 

[visva]

ok thank you for your replay.Then how can i configure with proteus. please tell me the procedure. How can i see the output data has received on the port if i send data from micro controller.

 

[ernpao]

i think i may have deleted my first post, but to answer your question on how to configure the port in proteus, i think this video may help: https://www.youtube.com/watch?v=cNI4Z3BQ8NI. i've attached a picture of the configuration i used myself. the video basically taught me how to use virtual serial port emulators and how to interface proteus to a program which accesses the serial port.

https://obrazki.elektroda.pl/8512739900_1350225674.jpg

 

[visva]

thank you. after working on it , if i have any other doubts i will ask you.